Jaw Crushers
.jpg)
General introduction of Jaw Crushers:
Jaw Crushers are mainly used to crush kinds of mining stone primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.
Working Principle of Jaw Crushers:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft. The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves awavy from fixed jaw by the pulling of rod and spring, the products such as stone after crushing will be discharged from the outlet.
Main Features and Benefits of Jaw Crushers:
- High ratio of crushing,
- homogeneous final grain size,
- simple structure,
- reliable working condition,
- easy maintenance,
- low operating cost.
Jaw crushers Specifications:
|
Model |
Max. Feeding Size(MM) |
Output Range(MM) |
Capacity (m3/h) |
Motor Power (Kw) |
Weight (t) |
|
PE-150×250 |
125 |
10-40 |
0.6-3 |
5.5 |
0.81 |
|
PE-200×300 |
180 |
20-50 |
2-8 |
11 |
1.5 |
|
PE-250×400 |
210 |
20-60 |
3-13 |
15 |
2.8 |
|
PE-400×600 |
340 |
40-100 |
10-34 |
30 |
6.5 |
|
PE-600×900 |
500 |
65-160 |
30-75 |
55-75 |
15.5 |
|
PEX-150×750 |
120 |
18-48 |
5-16 |
15 |
3.5 |
|
PEX-250×750 |
210 |
25-60 |
8-22 |
22 |
4.9 |
|
PEX-250×1000 |
210 |
25-60 |
10-32 |
30-37 |
6.5 |